Free delivery over £250 (Exceptions Apply) Free Click & Collect available Next Day available | 30 Day Return Policy Further delivery information Payment options
Free delivery over £250 (Exceptions Apply) Free Click & Collect available Next Day available | 30 Day Return Policy Further delivery information Payment options
ESBE T4 Blending Valve For Water UFH manifold. This will replace most pump control units on the market so long as the manifold centre is 210mm. Can be used with either our Wilo or Grundfos pumps. Will Replace many other pump sets such as the Reliance, JG Speedfit, Watt, Ivar and Purmo.
Connections:
Primary connections: 3/4” BSPF
Manifold connections: 1” BSPM
ESBE T4 Specification:
Kv: 3.4Kv (Up to 220sqm / 18kW)
Temperature range: 20°C - 55°C
Max temperature range: Continuously = 95°C / Temporarily = 100°C
Maximum supply pressure: 10 Bar
Esbe T4 Features:
20°C-55°C temperature range for force screed drying (BS1264)
‘A’ rated pump (Grundfos or Wilo)
Integrated check valves for easy filling
Temperature gauge
Assembled in the UK: pre-tested, packaged and ready for instant installation
This Heat Pump Pack with Grundfos Pump has been specifically designed to work with a heat pump. There is no mixing Valve with this back and the configuration allows for left and right-hand configuration. The elbow means that the primary flow and returns can be fitted neat and tidy. A Grundfos Pump is supplied with this Unit. Also available with a Wilo Pump
Heat Pump Pack with Grundfos Pump Specification
Output: Up to 250sqm / 20kW
Max temperature range: Continuously = 95°C / Temporarily = 100°C
Maximum supply pressure: 10 Bar
Primary connections: 3/4” BSPF
Manifolds connections: 1” BSPM
No requirement for a mixing valve
Compact design
‘A’ rated 25/70 Grundfos Pump
Integrated check valves for easy filling
Temperature gauge
Assembled in the UK: pre-tested, packaged and ready for instant installation
Free delivery over £250 (Exceptions Apply) Free Click & Collect available Next Day available | 30 Day Return Policy Further delivery information Payment options
Free delivery over £250 (Exceptions Apply) Free Click & Collect available Next Day available | 30 Day Return Policy Further delivery information Payment options
This Grundfos Single Loop Control Pack is designed to control the flow and water temperature in your UFH system. It is pre-assembled and tested to ensure that it can be fitted with the minimum of on-site labour and commissioned immediately once fitted. Often referred to as One zone underfloor heating Pack/kit. The temperature switch that supplies the power to the pump will remain open until the existing heating system water is above 40°c, to which the switch will then close switching on the pump which will allow the TMV to mix flow and return to the required UFH temperature.
Grundfos Single Loop Control Pack Specification
Single zone
“A” rated Grundfos 25/7.5 pump
ESBE 35-60 UFH thermostatic mixing valve c/w built-in bypass, made in Sweden
Compact design with wall mounting plate
Pre-wired pump terminal box
1.5 kv, (5kw ouput)
Fitted temperature switch (40C)
Pre-tested, pre-packaged and pre-built for instant install, assembled in the UK
This Single Loop Wilo Pump Control Pack is designed to control the flow and water temperature in your UFH system. It is pre-assembled and tested to ensure that it can be fitted with the minimum of on-site labour and commissioned immediately once fitted. Often referred to as One zone underfloor heating Pack/kit. The temperature switch that supplies the power to the pump will remain open until the existing heating system water is above 40°c, to which the switch will then close switching on the pump which will allow the TMV to mix flow and return to the required UFH temperature.
Single Loop Wilo Pump Control Pack Specification
Single zone
"A" rated Wilo Para 25/6 SCU pump
ESBE 35-60 UFH thermostatic mixing valve c/w built-in bypass, made in Sweden
Compact design with wall mounting plate
Pre-wired pump terminal box
1.5 kv, (5kw ouput)
Fitted temperature switch (40C)
Pre-tested, pre-packaged and pre-built for instant install, assembled in the UK
This Grundfos & ESBE Manifold Pump Set is designed for the control of flow and water temperature in a UFH system. It is pre-assembled and tested to ensure that it can be fitted with the minimum of on-site labor and commissioned immediately once fitted. Grundfos A-rated Pump and Mixer Set Blending Valve thermostatically controls the flow temperature of water to the underfloor heating pipe. This will fit most underfloor manifolds such as Watts, Ivar, Komfort, Uponor, Emmeti, Hetta, and many more.
Grundfos & ESBE Manifold Pump Set (Pump Set Only ) Specification
20°C - 55°C temperature range suited for force screed drying in accordance with (BS1264)
"A" rated Grundfos 25/70 pump
Integrated check valves for easy filling
Temperature gauge
Assembled in the UK; comes pre-tested, packaged, and ready for instant installation
2 year warranty
Fully reversible (Left or Right sided manifold)
Side or bottom entry connections
Available in 210mm (200 and 225mm spacing also available, but not stocked) please contact us if you require a different size.
This Wilo & ESBE Manifold Pump Set is designed for the control of flow and water temperature in a UFH system. It is pre-assembled and tested to ensure that it can be fitted with the minimum of on-site labor and commissioned immediately once fitted. Wilo A-rated Pump and Mixer Set Blending Valve thermostatically controls the flow temperature of water to the underfloor heating pipe. This will fit most underfloor manifolds such as Watts, Ivar, Komfort, Uponor, Emmeti, Hetta, and many more.
Wilo & ESBE Manifold Pump Set (Pump Set Only ) Specification
20°C - 55°C temperature range suited for force screed drying in accordance with (BS1264)
"A" rated Wilo 25/60 pump
Integrated check valves for easy filling
Temperature gauge
Assembled in the UK; comes pre-tested, packaged, and ready for instant installation
2 year warranty
Fully reversible (Left or Right sided manifold)
Side or bottom entry connections
Available in 210mm (200 and 225mm spacing also available, but not stocked) please contact us if you require a different size.
Free delivery over £250 (Exceptions Apply) Free Click & Collect available Next Day available | 30 Day Return Policy Further delivery information Payment options
Free delivery over £250 (Exceptions Apply) Free Click & Collect available Next Day available | 30 Day Return Policy Further delivery information Payment options
Reliance 22mm Heatguard Blending Valve (HEAT219058) is for mixing the flow and return water. Commonly referred to as Heatguard. This will achieve a stable system temperature in underfloor heating systems. The valve is suitable for high flow rates. Covering up to 150m², all floor types and uses wax capsule technology. This valve has a lockable temperature adjustment mechanism. this prevents tampering and compression connections for ease of installation. The set temperature is indicated on the cap for easy adjustment. It offers superb temperature control and a quick reaction to supply temperature changes. These benefits make the RWC/JG 22mm Heatguard UFH blending valve a great choice. The blending valve contains temperature-sensitive components. Please avoid soldering near the body.
Reliance 22mm Heatguard Blending Valve Features
Wax capsule technology
Lockable temperature adjustment mechanism
Set temperature on cap
Superb temperature control
Quick reaction to supply temperature changes
Suitable for all floor types
Available in two sizes - 28mm and 22mm
Compression type connections for ease of installation
Specification
Temperature range: 35 – 65° Celsius (35° C – 65° C)
Maximum Water Temperature: 90° Celsius
Temperature Stability: +/- 2°C
Maximum Static Pressure: 10 bar.
Maximum Working Pressure: 6 bar
Connections: 22mm Compression
Floor area: approximately 150m²
Also available to purchase in 28mm: 28mm Blended Valve. Also, a John Guest Replacement.
Free delivery over £250 (Exceptions Apply) Free Click & Collect available Next Day available | 30 Day Return Policy Further delivery information Payment options