Underfloor Heating

Free delivery over £250 (Exceptions Apply)
Free Click & Collect available
Next Day available | 30 Day Return Policy
Further delivery information
Payment options

Free delivery over £250 (Exceptions Apply)
Free Click & Collect available
Next Day available | 30 Day Return Policy
Further delivery information
Payment options

Free delivery over £250 (Exceptions Apply)
Free Click & Collect available
Next Day available | 30 Day Return Policy
Further delivery information
Payment options

Emmeti T2 Topway Plus Manifold 8 Port 1inch are pre-assembled with flow meters allowing for regulations of flow between 0-4 litres per minute. These are on each port of the manifold allowing individual loop/zone regulation. Flow meters are visual indicators, allowing both engineer and end-user the ability to control the system. The flow metes can also isolate a loop. The return Bar also included manual caps to isolate the system (these are usually replaced with actuators). All Emmeti manifolds come complete with auto air vents, pressure gauge, blanking plug for manifold (allowing for right and left configuration). Please note, Ball Valves are not included with this kit you must select if required.

This state of the art Emmeti T2 Topway Plus Manifolds 1inch is assembled onto a metal bracket, making for quick and easy installation. It has an electrothermic body integrated for each return circuit, ready to be actuated by the electrothermic head. The electrothermic heads are connected to the room thermostats located in each room or zone, via a central wiring centre.

The manifold includes lockshield or flowmeters on the flow rail, with a double regulating function for individual circuit isolation, and manual setting of flow control for heat balancing per radiator. It also includes automatic air vents and drain-off (filling) points as standard. All of these reduce commissioning time, no longer having to physically move to each room or zone to balance each radiator.

Integrated functions

Central control for distribution, manual isolation by a circuit or by floor, commissioning of each zone by balancing, system air venting and automatic “electrical” flow isolation when a room is up to temperature. This also allows individual circuit purging.

Optional functions

• Measuring of flow using flow meters, allowing reading of dynamic flow during balancing. Measuring temperature using thermostats integrated into the ball valves, one on the flow and one on the return rail. These aid installation by allowing the installer to verify the hot water is flowing, and how much, as well as what flow and return temperatures are being achieved.
• Differential by-pass, to prevent pump wear and tear.
• Time/temperature wall stats, with the setback facility, for the individual zones or rooms.
• Wiring centre, allowing boiler interlock and pump stop/start.

Emmeti T2 Topway Plus Manifolds Specification

• Nickel-Plated extruded Brass construction -
• STAINLESS Inlet Connections 1"
• Outlet Connections 24x19
• Outlet Centres 50mm
• Individual Circuit Isolation
• 10 Bar Maximum Operating
• Pressure 110C Maximum Operating Temperature

Manufacturer Part Numbers

• 2 Port - 01282260
• 3 Port - 01282262
• 4 Port - 01282264
• 5 Port - 01282266
• 6 Port - 01282268
• 7 Port - 01282270
• 8 Port - 01282272
• 9 Port - 01282274
• 10 Port - 01282276
• 11 Port - 01282278
• 12 Port - 01282280

Emmeti T2 Topway Plus Manifolds Video

[su_youtube_advanced url="https://www.youtube.com/watch?v=7hWvqkWFCfI" rel="no" title="Emmeti T2 Topway Plus Manifolds Video"]

Emmeti T2 Topway Plus Manifold 9 Port 1inch are pre-assembled with flow meters allowing for regulations of flow between 0-4 litres per minute. These are on each port of the manifold allowing individual loop/zone regulation. Flow meters are visual indicators, allowing both engineer and end-user the ability to control the system. The flow metes can also isolate a loop. The return Bar also included manual caps to isolate the system (these are usually replaced with actuators). All Emmeti manifolds come complete with auto air vents, pressure gauge, blanking plug for manifold (allowing for right and left configuration). Please note, Ball Valves are not included with this kit you must select if required.

This state of the art Emmeti T2 Topway Plus Manifolds 1inch is assembled onto a metal bracket, making for quick and easy installation. It has an electrothermic body integrated for each return circuit, ready to be actuated by the electrothermic head. The electrothermic heads are connected to the room thermostats located in each room or zone, via a central wiring centre.

The manifold includes lockshield or flowmeters on the flow rail, with a double regulating function for individual circuit isolation, and manual setting of flow control for heat balancing per radiator. It also includes automatic air vents and drain-off (filling) points as standard. All of these reduce commissioning time, no longer having to physically move to each room or zone to balance each radiator.

Integrated functions

Central control for distribution, manual isolation by a circuit or by floor, commissioning of each zone by balancing, system air venting and automatic “electrical” flow isolation when a room is up to temperature. This also allows individual circuit purging.

Optional functions

• Measuring of flow using flow meters, allowing reading of dynamic flow during balancing. Measuring temperature using thermostats integrated into the ball valves, one on the flow and one on the return rail. These aid installation by allowing the installer to verify the hot water is flowing, and how much, as well as what flow and return temperatures are being achieved.
• Differential by-pass, to prevent pump wear and tear.
• Time/temperature wall stats, with the setback facility, for the individual zones or rooms.
• Wiring centre, allowing boiler interlock and pump stop/start.

Emmeti T2 Topway Plus Manifolds Specification

• Nickel-Plated extruded Brass construction -
• STAINLESS Inlet Connections 1"
• Outlet Connections 24x19
• Outlet Centres 50mm
• Individual Circuit Isolation
• 10 Bar Maximum Operating
• Pressure 110C Maximum Operating Temperature

Manufacturer Part Numbers

• 2 Port - 01282260
• 3 Port - 01282262
• 4 Port - 01282264
• 5 Port - 01282266
• 6 Port - 01282268
• 7 Port - 01282270
• 8 Port - 01282272
• 9 Port - 01282274
• 10 Port - 01282276
• 11 Port - 01282278
• 12 Port - 01282280

Emmeti T2 Topway Plus Manifolds Video

[su_youtube_advanced url="https://www.youtube.com/watch?v=7hWvqkWFCfI" rel="no" title="Emmeti T2 Topway Plus Manifolds Video"]

Free delivery over £250 (Exceptions Apply)
Free Click & Collect available
Next Day available | 30 Day Return Policy
Further delivery information
Payment options

Free delivery over £250 (Exceptions Apply)
Free Click & Collect available
Next Day available | 30 Day Return Policy
Further delivery information
Payment options

Free delivery over £250 (Exceptions Apply)
Free Click & Collect available
Next Day available | 30 Day Return Policy
Further delivery information
Payment options

Free delivery over £250 (Exceptions Apply)
Free Click & Collect available
Next Day available | 30 Day Return Policy
Further delivery information
Payment options

Free delivery over £250 (Exceptions Apply)
Free Click & Collect available
Next Day available | 30 Day Return Policy
Further delivery information
Payment options

Free delivery over £250 (Exceptions Apply)
Free Click & Collect available
Next Day available | 30 Day Return Policy
Further delivery information
Payment options

Free delivery over £250 (Exceptions Apply)
Free Click & Collect available
Next Day available | 30 Day Return Policy
Further delivery information
Payment options

Free delivery over £250 (Exceptions Apply)
Free Click & Collect available
Next Day available | 30 Day Return Policy
Further delivery information
Payment options

Free delivery over £250 (Exceptions Apply)
Free Click & Collect available
Next Day available | 30 Day Return Policy
Further delivery information
Payment options

Free delivery over £250 (Exceptions Apply)
Free Click & Collect available
Next Day available | 30 Day Return Policy
Further delivery information
Payment options

Free delivery over £250 (Exceptions Apply)
Free Click & Collect available
Next Day available | 30 Day Return Policy
Further delivery information
Payment options

Free delivery over £250 (Exceptions Apply)
Free Click & Collect available
Next Day available | 30 Day Return Policy
Further delivery information
Payment options

ESBE T4 Blending Valve For Water UFH manifold. This will replace most pump control units on the market so long as the manifold centre is 210mm. Can be used with either our Wilo or Grundfos pumps. Will Replace many other pump sets such as the Reliance, JG Speedfit, Watt, Ivar and Purmo.

Connections:

• Primary connections: 3/4” BSPF
• Manifold connections: 1” BSPM

ESBE T4 Specification:

• Kv: 3.4Kv (Up to 220sqm / 18kW)
• Temperature range: 20°C - 55°C
• Max temperature range: Continuously = 95°C / Temporarily = 100°C
• Maximum supply pressure: 10 Bar

Esbe T4 Features:

• 20°C-55°C temperature range for force screed drying (BS1264)
• ‘A’ rated pump (Grundfos or Wilo)
• Integrated check valves for easy filling
• Temperature gauge
• Assembled in the UK: pre-tested, packaged and ready for instant installation
• Fully reversible (Left or Right sided manifold)
• Available in 210mm manifold connection centres
• Side or bottom entry connections
• 2-year warranty

This Heat Pump Pack with Grundfos Pump has been specifically designed to work with a heat pump. There is no mixing Valve with this back and the configuration allows for left and right-hand configuration. The elbow means that the primary flow and returns can be fitted neat and tidy. A Grundfos Pump is supplied with this Unit. Also available with a Wilo Pump

Heat Pump Pack with Grundfos Pump Specification

• Output: Up to 250sqm / 20kW
• Max temperature range: Continuously = 95°C / Temporarily = 100°C
• Maximum supply pressure: 10 Bar
• Primary connections: 3/4” BSPF
• Manifolds connections: 1” BSPM
• No requirement for a mixing valve
• Compact design
• ‘A’ rated 25/70 Grundfos Pump
• Integrated check valves for easy filling
• Temperature gauge
• Assembled in the UK: pre-tested, packaged and ready for instant installation
• 2 Years warranty
• Fully reversible (Left or Right sided manifold)
• Side or bottom entry connections
• Available in 210mm manifold connection centres.

Free delivery over £250 (Exceptions Apply)
Free Click & Collect available
Next Day available | 30 Day Return Policy
Further delivery information
Payment options